Danh mục

Đối tác



Số người truy cập

549512

Ampe kìm đo điện trở đất HIOKI- Nhật Bản, FT6380/ FT6381 ( 1600Ω)

Giá: Liên Hệ
Đặt hàng

Thông số kỹ thuật:

Hãng sản xuất: HIOKI

Xuất xứ: Nhật Bản

Bảo hành: 12 Tháng

Thông số kỹ thuật

Điện trở nối đất

10 dải đo từ 0.20 Ω (độ phân giải 0.01 Ω) đến 1600 Ω (độ phân giải 20 Ω), thấp hơn 0.02 Ω tự động về không, Độ chính xác: ±1.5 % rdg. ±0.02 Ω

Đo dòng AC

20.00 mA (độ phân giải 0.01 mA) đến 60.0 A (độ phân giải 0.1 A), 5 dải, thấp hơn 0.05 mA tự động về không Độ chính xác: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Hệ số đỉnh dưới 5.0 (dưới 1.7 dải  60 A)

Đầu vào tối đa cho phép

AC 100 A liên tục, AC 200 A cho 2 phút hoặc ngắn hơn (tại 50/60 Hz, yêu cầu giảm tần số)

Điện áp danh định tới đất tối đa

AC 600 V CAT IV

Chức năng ghi nhớ

2000 dữ liệu

Chức năng cảnh báo

Khi đo điện trở và đo dòng, phát tiếng “Bíp” khi giá trị đo thấp hơn hoặc cao hơn ngưỡng.

Chức năng khác

Giữ dữ liệu, Đèn nền, Bộ lọc, Tự động tắt nguồn

Hiển thị

LCD 2000 dgt., Tốc độ làm tưoi: 500 msec (khoảng. 2 lần/giây)

Chống thấm và chống bụi

IP40 (EN60529: 1991+A1: 2000) với cảm biến kìm đóng

Giao diện giao tiếp

Duy nhất Model FT6381: Bluetooth® v2.1+EDR, Tương thích với Smartphone / Tablet, Hiển thị kết quả đo trên màn hình thiết bị Android™ qua Bluetooth, Hệ điều hành hỗ trợ: Android™ 2.1 trở lên

Nguồn

Pin LR6 (AA) alkaline ×2, công suất định mức tối đa: 450 mVA, Sử dụng liên tục : 35 hr (điều kiện kiểm tra trong nhà)

Core jaw dia.

φ 32 mm (1.26 in)

Kích thước khối lượng

73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz)

Phụ kiện kèm theo

Hộp đựng ×1, Vòng đo điện trở ×1, Dây đai ×1, Pin LR06 alkaline ×2, Hướng dẫn sử dụng ×1

Lightweight Ground Clamps with Bluetooth® Data Transfer

The FT6380 and FT6381 measure grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A.

Note) The application supports Android™ OS 2.1 or later, but proper operation is not guaranteed on all Android™ handsets. For more information about the devices on which proper operation has been confirmed, please refer to the notes on the right. Please download and install the “FT6381 Communication Software” from the Google Play™ store in order to use the wireless connection function with an Android™ phone. The software is free, but the user is responsible for any Internet connection costs incurred in the course of downloading or using the application. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by Hioki E.E. Corporation.

Basic specifications (Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times)

The devices on which proper operation has been confirmed via a Bluetooth® wireless technology in Jul. 2012
In U.S.A. : Sony Tablet S, Droid X, Galaxy Tab, THRiVE, Nitro HD, Iconia A100, Inspire

Measurement Principle Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated
Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value.
Earthing resistance 0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, 
Accuracy: ±1.5 % rdg. ±0.02 Ω
AC Current measurement 20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, 
Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less)
Max. allowable input 100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50/60 Hz, requires derating at frequency)
Max. rated voltage to earth 600 V AC CAT IV
Memory function 2000 data
Alarm function For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold
Other functions Data hold, Backlight, Filter, Auto power save
Display Digital LCD, max. 2000 dgt., Display refresh rate: 500 ms (2 times/s)
Waterproof and dustproof IP40 (EN60529) with clamp sensor closed
Communication interface Model FT6381 only: Bluetooth® v2.1+EDR, Compatibility for Smartphone / Tablet, Displays measured values on the screen of an Android™ handset via Bluetooth®, Applicable OS: Android™ 2.1 or later
Power supply LR6 (AA) alkaline battery ×2, Max. rated power: 450 mVA, Continuous use : 35 hr (in-house testing conditions)
Core jaw dia. φ 32 mm (1.26 in)
Dimensions and mass 73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz)
Accessories Carrying case ×1, Resistance check loop (1 Ω, 25 Ω) ×1, Strap ×1, LR06 (AA) alkaline battery ×2, Instruction manual ×1